Skip to content
‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎‎‎‏‏‎‏‏‎‎‏‏‎‎‏G‎‏‏‎‎‏‏oing to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV‎‏‏‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎
‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days ‏‏‎ Going to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV
Warranty Shipping Contact
September 8, 2020

WHY DO DRILL BITS BREAK?

WHY DO DRILL BITS BREAK?

Having the right drill bit in the right application can make the toughest job a breeze. Here are a few reasons your drill bits might be breaking. From the experts, here are recommendations for your drill jobs to prevent broken bits.

DRILL BIT MANUFACTURING

A standard drill bit can be manufactured in many ways, but most commonly and economically is stamped or crimped to form the twist or flute. The point and cutting edges are then ground for the correct size and application. That method is where accuracy is not as important as just getting a hole in the material.

On the other hand, machine-grade tools are made for precision applications, where accuracy and repeatability are most important. Machine-grade tooling is turned, ground flat, and incorporates features that deliver the precision and accuracy required for the application.

Machine-grade tools are made from high-quality metals like cobalt or carbide. Micro-points are added so the tooling stays on track. Cutting edges are ground at complex geometries demanded by the hardest of materials, including titanium, boron, extra-strength, and case-hardened steels, most of which are encountered in exhaust manifold bolt repairs.

DRILLING CONDITIONS

We recommend applying a small amount of drilling and tapping fluid to any heavy-duty drilling job. This will reduce the amount of torque and resistance your bit meets when drilling the initial pilot hole.

Another staple in any one of our drill applications are drill bushings. Drill bushings mounted to an alignment fixture can be the difference between success and a costly failure. Threaded mounting bushings are most common in machine shops because of their superior accuracy.

DRILL BIT DESIGN

A threaded mounting bushing incorporates a proprietary and precision machined edge that mates to an opposite edge in the tool which overrides the threads to bring the assembly into perfect alignment with the cylinder head. Threaded mounting bushings will assure perfect alignment and perpendicularity of tooling. How the tooling system is used will determine repair times and quality.

Not all drill bit designs are made equally. Using a bit with the right flute volume will allow the buildup of chips to be expelled as you move your drill in and out of the drill hole.

Using machine-grade tooling and following the above steps will ensure productive and efficient repairs that will boost productivity and keep your customers’ cars safe and running at peak performance.

Be sure to check out our ProDrill series of bits, bushings and taps - all precision engineered to cut through the hardest materials with speed and accuracy.

SEE WHY PROMAXX TOOLING DRILL BITS ARE BEST
PROMAXX TOOL DRILL BITS VS. CONSUMER GRADE ProMAXX Tool Drill Bits comparison to consumer bits
Premium Drill Bits From ProMAXX Tool
Previous article Exhaust Manifold Broken Bolt Repair Made Easy: Machine-Grade Drill Bit Tooling
Next article HOW TO PULL WHEEL BEARING HUBS – THE RIGHT WAY

NEW AT PROMAX

  • Ford Explorer SAFETY RECALL 22S27-SB 204-594 Forcing Screw Replacement
    204-594 Forcing Screw Replacement

    Forcing Screw Alternative to Ford 2020-2022 Explorer Recall Special Service Tool part# 204-594 "Thunderbolt"

    Part#: PMX204-594
    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95

    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95
  • SAVE: 25% SAVE: %
    Fuel Injector Seal Puller (PMXISP200A)
    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller

    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit

    Part#: PMXISPS200BSE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95

    Fuel Injector Seal Puller/Saver ProKit Part #: PMXISPS200PRO Introducing the cutting-edge Ford Power Stroke 6.7L Fuel Injector Copper Compression S...

    VIEW MORE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95
    SAVE: 25% SAVE: %
  • Ford-6.7L-Power-Stroke-EGR-Tube-Broken-Bolt-ProKit-Plus
    Ford-6.7L-Power-Stroke-EGR-Tube-Broken-Bolt-ProKit

    Ford 6.7L Power Stroke Diesel EGR Tube Broken Bolt Repair Kit - Nino

    Part#: PMXN200PRO
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95

    Nino EGR Tube ProKit Part #: PMXN200PRO 6.7L Ford Power Stroke Diesel Exhaust Gas Recirculation EGR Repair Kit - Nino The ProMAXX® EGR (Nino™) repa...

    VIEW MORE
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95
  • Ford 6.7L Diesel Power Stroke Fuel Injector Broken Bolt Repair Kit
    Ford-67L-Power-Stroke-Fuel-Injector-Broken-Bolt-Repair-ProKit

    Ford 6.7L Diesel Power Stroke Fuel Injector Broken Bolt Repair Kit - Nico

    Part#: PMXO200PRO
    $549.95 - $699.95
    $549.95
    $549.95 - $699.95
    $549.95 - $699.95
    $549.95

    Now, Take $100 Off Nico ProKit PlusAnd…Get an Extra Insert - That’s a $179 Value! Ford 6.7L Power Stroke Diesel Hold-Down Bolt Repair ProKit Plus #...

    VIEW MORE
    $549.95 - $699.95
    $549.95
    $549.95 - $699.95
    $549.95 - $699.95
    $549.95
  • Ford 6.7L Power Stroke Fuel Injector Puller ProKit
    Ford 6.7L Power Stroke Fuel Injector Puller With Air-Hammer Powered Punch

    Ford 6.7L Power Stroke Fuel Injector Puller With Air-Hammer Assisted Punch / Slide Hammer Options – PowerPull 200

    Part#: PMXPWP200PROP
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95

    Revolutionize fuel injector removal with the ProMAXX PowerPull Ford 6.7L Power Stroke Fuel Injector Puller Kit. It is the only puller that does not...

    VIEW MORE
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95

SHIPPING INFO

For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today
724-941-0941

Promaxx Tool Address

1121 Boyce Road
Suite #2000
Pittsburgh, PA 15241

Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.